Difference between revisions of "Computed tomography dose index"

From ICRPaedia
Jump to navigation Jump to search
Line 9: Line 9:
 
where C is the radiographic exposure (mAs) and D(z) is the radiation dose measured at position z along the scanner's main axis.
 
where C is the radiographic exposure (mAs) and D(z) is the radiation dose measured at position z along the scanner's main axis.
  
Since doses at center of body are approximately two times of those at shallow depths in typical CT scans, improved indices are proposed and used. One of them is the weighted CTDI, <math>CTDI_{100w}</math>, defined as:
+
Since doses at center of body are approximately two times of those at shallow depths in typical CT scans, improved indices are proposed and used. One of them is the weighted CTDI, CTDI<sub>100w</sub>, defined as:
 
   
 
   
 
<div style='text-align: center;'>
 
<div style='text-align: center;'>

Revision as of 19:19, 6 June 2019

A dose quantity defined to give indication of doses to the patient undergoing CT scans. The basic CTDI is the average absorbed dose at the center of the standard CT phantom imparted by a single axial acquisition of 100 mm by a CT scanner, CTDI100:

[math] CTDI_{100} = \frac{1}{C}\int\limits_{-50 mm}^{+50 mm}dzD(z) [/math]

where C is the radiographic exposure (mAs) and D(z) is the radiation dose measured at position z along the scanner's main axis.

Since doses at center of body are approximately two times of those at shallow depths in typical CT scans, improved indices are proposed and used. One of them is the weighted CTDI, CTDI100w, defined as:

[math] CTDI_{100w} = \frac{1}{3}CTDI_{100}^{central} + \frac{2}{3}CTDI_{100}^{peripheral} [/math]


where [math]CTDI_{100}^{central}[/math] and [math]CTDI_{100}^{peripheral}[/math] are the CTDIs at the center and peripheral, respectively. The standard CT phantoms are PMMA cylinders having defined diameters (32 cm for torso and 16 cm for head-and-neck) and appropriate length enough to cover the 100 mm (usually 15 cm is employed). There are holes to place the detectors: one at the center and a few on a peripheral circle. Traditionally pencil ion chambers of 100mm long were used as the detectors but detectors of other types may be used as calibrated appropriately.


ICRP Glossary entry - May 2019